FisCal Inst Server and telephone systems are being upgraded on Friday 20/02/15.
Apologies for any inconvenience during the outage from 1200-1500 hours
Fiscal Instrumentation
Tumulus Way, Midmill Business Park,
Kintore, Aberdeenshire,
AB51 0TG
T: 01467 633 303 F: 01467 633 565
FisCal Inst Server and telephone systems are being upgraded on Friday 20/02/15.
Apologies for any inconvenience during the outage from 1200-1500 hours
Splendid new Video showing operation of Helical TZN from our French chums at FH
http://www.faureherman.com/news/#1037
http://www.faureherman.com/our-technologies/helical-turbine-flowmeters/
Just last month, our support engineers – Keith Comrie & Phil Knox – participated in a four-day service engineer’s training course at Emerson’s European manufacturing hub in the Netherlands.
The course focused on vortex, magnetic & coriolis meters, covering the following areas:
The knowledge gained from this will be of a great benefit to our support engineers and their ability to handle queries relating to Emerson’s flow products.
The Meter2di, designed by EPS, can be viewed here and below:
http://vimeo.com/59472250
Feedback would be greatly appreciated and should you have queries, please don’t hesitate to contact us.
We are pleased to announce that Phil Knox has successfully completed his probation before the 6th month mark.
Phil will continue his employment as one of our support engineers and will personally oversee all densitometer works scheduled for this year & beyond.
Please be advised that this event is now cancelled.
We apologise for any inconvenience caused as a result of this.
One of support engineers is pictured below investigating a 4″ Endress & Hauser coriolis meter with an endoscope.
Many of our clients opt for this procedure to determine the condition of their meters prior to as found calibrations or for report/audit purposes.
Meters are checked for LSA levels and are then cleaned with kerosene and specially designed CSFB tools before the endoscope can be inserted to assess and record the state of the thin wall tubes.
In some cases where scale is discovered we can record before and after descaling works which can be useful if undertaking density/mass flow miss-measurements caused by scale build-up on the tube walls.
All calibration facilities insist on flow meters being decontaminated before being allowed on the test rig.
Typically, FisCal can conduct a full clean and check within a day, with a report and imagery to follow upon completion if required.
Please be advised that we will be closing the office as of 15:00 on December 21st for the Christmas & New Year period.
We will reopen at 08:00 on January 3rd.
We wish you all a Merry Christmas and a Happy New Year. Thank you for your custom over the past year, and we look forward to conducting business once more in the year ahead.
Emergency Contact Details:
Brian Haigh – 07918168033
Connor Woodford (Deliveries) – 07864425829
As of January 2013, Micro Motion (Emerson) will be operating an entirely new calibration procedure in accordance with DECC’s latest requirements.
Research conducted on the combined effects of temperature & pressure on liquid densitometers has resulted in DECC stating that as of 2013, all liquid densitometer calibrations should be as per their anticipated operating conditions.
ALL 7835 Micro Motion densitometer models will be supported by the new procedure, and as of next month (December), we will be operating our entirely new inspection and cleaning facility specifically intended for Micro Motion densitometers.
Micro Motion are currently in the process of preparing their new calibration stands for full operation in mid-January next year. A target of mid-2013 has also been established for ISO 17025 approval of the new stands.
Full details can be acquired in this presentation.
Please contact us at cwoodford@fiscalinst.com or pknox@fiscalinst.com if you require re-calibrations of your 7835 densitometers or require any further information.
FisCal will mark the official launch of the Meter2di – designed by EPS – at this year’s upcoming North Sea Flow Measurement Workshop scheduled for October 23-26.
The Meter2di is a patented system for the process of inspecting and changing orifice plates in conformance with stringent industry guidelines.
Features:
__________________________________________________________________
Where to find us at NSFMW: Stand 3, Conference Centre (Section B), Fairmont St Andrews Hotel.
Further details about the EPS Meter2di can be found here.
Detailed information regarding the event itself can be found at this address.
Should you desire any information not displayed above, please contact Brian Haigh or Connor Woodford.